User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 295
Dialogic Corporation
Resolved IPY00020965 27459 -- DM/IP Boards Application returns “synchronization object time out”
error when calling IPML functions.
Resolved IPY00020954 26090 -- DM/IP Boards An IP call to a non-existent IP address returns “normal
clearing”.
Resolved IPY00020951 25615 -- DM/IP Boards In the iptmail_r4.dsp parser in the apppars.c module
cannot handle 0D0D0A (CRCRLF) in the last line of
the iptmail_r4.cfg, which causes iptmail_r4 to crash in
In_mailInitialization( ) function.
Resolved IPY00020557 28561 -- DM/IP Boards gc_GetCTInfo( ) wrongly reports bus encoding as
mu-law when called on a Dialogic
®
DM/IP Board
configured for A-law operation.
Resolved IPY00020556 28282 -- DM/IP Boards When attempting a stop procedure using gc_Stop( ),
the handlers are trying to be disabled without checking
whether they were enabled in the first place.
Resolved IPY00020545 29167 -- DM/IP Boards Error messages in GC_H3R logs while running fax
over IP (Non T.38).
Resolved IPY00014105 28272 -- DM/IP Boards When DMA is enabled on Dialogic
®
DM/IP Boards
and a host to board or board to host DMA transfer is
taking place, there is a chance that the transfer might
not complete and the board would hang waiting for the
completion to occur.
Resolved IPY00012521 29111 -- DM/IP Boards Downloading IPVSC firmware creates iptBxTy in the
registry.
Resolved IPY00010565 35077 56 DM/IP Boards The Dialogic
®
DM/IP601-2E1-100 Board cannot start;
it fails with error.
Resolved IPY00009062 19233 -- DM/IP Boards Trying to change media type on the TDM Bus from
mu-law to A-law or vice versa with a T1 or E1
Dialogic
®
DM/IP Board in the system, produces error
message “error calling CTBB_UserApply( )”.
Resolved IPY00009042 31632 22 DM/IP Boards When using Dialogic
®
DM/IP Boards, the Type Of
Service (TOS) byte cannot be set dynamically using
either the Dialogic
®
Global Call API or the Dialogic
®
IP
Media Library API.
Resolved IPY00008839 33389 18 DM/IP Boards RTP data sent over IP immediately after a fax CED
call progress tone may be delayed and cause choppy
audio at a receiving device. In a back to back
configuration, the fax CED call progress tone is not
always detected when using 30 ms G.711 coders.
Resolved IPY00007640 30390 30 DM/IP Boards When using Microsoft NetMeeting to call into the
iptmail_r4 demo, connections fail or DTMFs dialed
from NetMeeting are not being detected when using
different coders on the Tx (local) and Rx (receive)
sides.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description