User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 297
Dialogic Corporation
Resolved IPY00015512 29922 -- DM/V-A Boards Download failures of ml2_qsa_net5.pcd and
ml2_qsa_qsige1.pcd files on Dialogic
®
DM/V1200A-
4E1-PCI Boards.
Resolved IPY00015507 29486 -- DM/V-A Boards dx_playiottdata( ) does not return any events. This
happens with Dialogic
®
DM/V960A and DM/V480A
Boards.
Resolved IPY00028649 36416 90 DM3 Admin Blue screen crashes occur in dlgcmpd when using
Dialogic
®
DM/V480A-2T1-PCI Boards on Windows
®
2003.
Resolved IPY00041233 -- 178 DM3 Call Control When a call is terminated in the GCST_DETECTED
state, a fake GCEV_OFFERED event should not be
generated if the application has enabled the
GCEV_DETECTED event.
Resolved IPY00041209 -- 178 DM3 Call Control GCEV_UNBLOCKED event doesn’t arrive for
individual channels, even though GCEV_BLOCKED
was delivered to individual channels, after AIS alarms
occur and are then cleared.
Resolved IPY00037507 -- 154 DM3 Call Control Event API fails to deliver an event when the T1 is
configured for CAS and the cable is unplugged.
Resolved IPY00036504 -- 144 DM3 Call Control Calling gc_MakeCall( ) causes a SETUP message to
be sent. If the first response from the other side is
CONNECTED, the board responds with
CONNECT_ACK, but GCEV_CONNECTED is not
sent to the application. The problem only occurs if the
board is set to Network End; if the board is set to User
End, GCEV_CONNECTED is sent.
Resolved IPY00034857 -- 148 DM3 Call Control When performing call progress analysis via the
Dialogic
®
Global Call media detection method, if the
media detection occurs before the out-of-band
CONNECT message is received, GCCT_UNKNOWN
is returned as a result.
Resolved IPY00039068 -- 166 DM3 Conferencing The dcb_addtoconf( ) function returns failure, and
ATDV_ERRMSGP shows the error message as
“Timed out waiting for reply from firmware.”
Resolved IPY00037861 -- 154 DM3 Conferencing If one conferee goes on mute, other conference
participants hear buzzing noise.
Note: A documentation update to Section 6.7, [0x3b]
Parameters (parameters 0x3b03 and 0x3b04)
has been added in the Documentation Updates
section for the Dialogic
®
DM3 Architecture PCI
Products on Windows
®
Configuration Guide.
Please refer to it for information relevant to this
defect resolution.
Resolved IPY00037817 -- 154 DM3 Conferencing When playing background music through the
telephone set, music cuts are heard when party A
speaks.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description