User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 298
Dialogic Corporation
Resolved IPY00037396 -- 148 DM3 Conferencing Static background noise trails voice in conferences
with more than six parties.
Resolved IPY00037373 -- 154 DM3 Conferencing In a conference with two parties, if party A keeps
speaking while party B starts speaking, party B hears
breaks from party A while party B is speaking.
Resolved IPY00038317 -- 155 DM3 Configuration The Dialogic
®
DM/F240-T1-PCI Board is incapable of
running T1 robbed bit protocols.
Resolved IPY00006345 36788 98 DM3 Configuration All *cas*.config files for T1 CAS protocols that come
by default or get generated (for Dialogic
®
DM/V-B
Boards) have all spans set for D4/B8ZS. However,
most T1 lines in the field are configured for D4/AMI or
ESF/B8ZS. This adds an extra configuration step
because the default doesn’t match either of the likely
cases.
Resolution: Based on feedback concerning standard
configuration of switches, the default layer1 line coding
parameter (0x1603) for the CAS loads was modified to
AMI (from B8ZS). This change does not affect any of
the other protocols.
Old: SetParm=0x1603,7 ! Coding (B8ZS=7, AMI=8)
New: SetParm=0x1603,8 ! Coding (B8ZS=7, AMI=8)
Resolved IPY00041421 -- 181 DM3 Fax Fax channels may hang when a stop is issued at the
end of a send fax page.
Resolved IPY00041079 -- 181 DM3 Fax The fx_rcvfax( ) function returns -1 error after the
system is running for several days, and the system is
not able to receive faxes.
Resolved IPY00039661 -- 174 DM3 Fax ATFX_RESLN( ) sometimes returns 0, which is an
invalid value. (According to the documentation, the
only valid values are 98 and 196.)
Note: A documentation update has been added in the
Documentation Updates section for the
Dialogic
®
Fax Software Reference. Please
refer to it for information relevant to this defect
resolution. There are additional return values
for ATFX_RESLN( ), and the values passed to
fx_rcvfax( ) and fx_sendfax( ) have more
options. (The defect number associated with
the documentation update is IPY00040796.)
Resolved IPY00039476 -- 171 DM3 Fax Stuck fax channels during inbound calls.
Resolved IPY00038407 -- 160 DM3 Fax ATFX_RESLN( ) sometimes returns 0, which is an
invalid value. (According to the documentation, the
only valid values are 98 and 196.)
Resolved IPY00037467 -- 154 DM3 Fax Dialogic
®
DM3 fax channel hangs. DebugAngel
reports two errors: “QERROR_KILLTASK” and then
“QERROR_WARNING”.
Resolved IPY00037166 -- 154 DM3 Fax After an inbound fax call, the fax resource cannot go
back to idle after fx_stopch( ).
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description