User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 306
Dialogic Corporation
Resolved IPY00037493 -- 155 DM3 Voice When running high volume load tests (500+ voice
channels) for performing records, the RTF log shows
“Buffer is corrupted” errors in the Dialogic
®
DM3
StreamSink component.
Resolved IPY00037262 -- 155 DM3 Voice Under certain corner conditions, host CPU utilization
increases a large percentage (15% witnessed) after
issuing a record on multiple voice channels, and
remains that way even after the record completes.
Resolved IPY00037183 -- 148 DM3 Voice When recording WAV 176 bps file (11 KHz, 16 bits per
sample), dx_mreciottdata( ) stops prematurely with
EOD before recording all bytes specified in io_length
field of DX_IOTT structure, if this field is set to some
large value (in this case, 26 Mb). Other formats, such
as 64 kbs PCM MuLaw, ALaw, Linear, and ADPCM did
not exhibit this problem.
Resolved IPY00036861 -- 144 DM3 Voice When attempting to run transaction recordings under
rapid succession, sometimes the internal CT Bus
routing fails and the record returns with a
TDX_ERROR event with the result “Switching Handler
is not Present.”
Resolved IPY00031562 36766 100 DM3 Voice After a transaction record, routing another voice
resource to another channel fails.
Resolved IPY00028576 36197 84 DM3 Voice ATDX_BDNAMEP( ) does not work properly with
Dialogic
®
DM3 Boards. When you request
ATDX_BDNAMEP( ) on the handler of dxxxB1C1 (of a
DM3 Board), you receive an empty string instead of
dxxxB1. When you request ATDX_BDNAMEP( ) on
the handler of dxxxB1 (of a DM3 Board), you receive
the string dxxxB1.
Resolved IPY00028527 36129 84 DM3 Voice gc_BlindTransfer( ) failed to return with
GCEV_BLINDTRANSFER after calling dx_getdig( )
(if digits are received).
Resolved IPY00028421 35417 70 DM3 Voice When using Dialogic
®
DM/V600BTEP Board, glitch
can be heard in recordings done by ec_stream( )
when another recording is being done on a
neighboring time slot.
Resolved IPY00028372 34427 56 DM3 Voice Channel gets stuck in a stopping state during record
operation, and dx_stopch( ) doesn't stop the channel.
Resolved IPY00028258 33717 71 DM3 Voice When selecting ml10_dsa_net5.pcd for a Dialogic
®
DM/V600A-2E1-PCI Board, DCM displays ML2_60. It
should display ML10_60 instead.
Resolved IPY00015578 28841 -- DM3 Voice “Device busy” message on voice resource after calling
quickly dx_stopch( ) on dx_TxRxIottData( ).
Resolved IPY00015574 28393 -- DM3 Voice dx_TxRxIottData( ) ignores TPT maxtime termination
when receiving FSK data.
Resolved IPY00015360 25285 -- DM3 Voice dx_dial( ) with “T” parameter does not set digits to
DTMF.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description