User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 307
Dialogic Corporation
Resolved IPY00014104 28121 -- DM3 Voice Need a method to improve call progress analysis on
Dialogic
®
DM3 Boards similar to that for Dialogic
®
Springware Boards.
Resolved IPY00011063 36799 92 DM3 Voice When using Dialogic
®
DISI32R2 Board, calling
ms_estconf( ) causes the following error to be
displayed: “Unhandled exception in application.exe
(NTDLL.DLL): 0xC0000005: Access Violation.”
Resolved IPY00010660 33502 18 DM3 Voice Board resets when multiple parties are added and
removed from conferences.
Resolved IPY00009683 33685 56 DM3 Voice dx_stopch( ) cannot stop voice channel if run in
thread.
Resolved IPY00009525 32827 30 DM3 Voice If an application calls dx_addspddig( ) to assign
DTMF values to increase and decrease speed, then
these DTMF values do not show up in the digit buffer
again until the board is redownloaded, even if the
conditions are cleared by dx_clrsvcond( ).
Resolved IPY00009433 34878 63 DM3 Voice dx_playiottdata( ) ignores the data length and plays
until EoF, which sometimes causes noise if there is
additional data after “data chunk.”
Resolved IPY00009279 33694 18 DM3 Voice dx_reciottdata(ASYNC) returns 0 but fails to return
any event, and after that, the channel does not
respond to any commands.
Resolved IPY00009231 32953 56 DM3 Voice Accuracy of call progress analysis (PVD, PAMD) when
using the default CPA qualification values for Dialogic
®
DM3 Boards needs to be improved.
Resolved IPY00008770 29169 -- DM3 Voice Time out waiting on reply from firmware when
ms_setstparm(MSSP_STPWR, MS_PWROFF or
MS_PWON) command was issued.
Resolved IPY00008559 32510 18 DM3 Voice The fcdgen utility reports an error when changing the
default PVD/PAMD qualification parameters.
Resolved IPY00007872 33351 18 DM3 Voice The dx_playtoneEx( ) function stopped after 40
repetitions; it did not play as long as defined.
Resolved IPY00019150 29550 -- DMV160LP dx_playiottdata( ) never returns any event.
Resolved IPY00016174 28266 -- DMV160LP Debug messages that shouldn't be there show up in
the DebugAngel viewer.
Resolved IPY00016064 28972 -- DMV160LP Caller ID is not received reliably 100% of the time.
Upon caller ID failure, the application receives an
empty caller ID string.
Resolved IPY00008722 29103 -- DMV160LP PBXs that provide excessive leakage current within
300 msec after a disconnect may trigger a false ring
indication.
Resolved IPY00008233 28782 -- DMV160LP dx_getfeaturelist( ) indicates that CSP is supported
on the 5th virtual board (which contains the fax
resources), but CSP functions cannot be called on
these resources.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description