User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 315
Dialogic Corporation
Resolved IPY00030671 32696 18 Host Drivers After the Driver Verifier finds an obsolete call used in
the device driver, a blue screen occurs.
Resolved IPY00030669 32557 18 Host Drivers A blue screen occurs during the boot verification tests
performed by the Windows
®
kernel using Verifier.exe.
Resolved IPY00028477 35170 62 Host Drivers Blue screens occur after >2 hours of load test when
more than one Dialogic
®
DMV1200B Board is
installed.
Resolved IPY00028390 35768 63 Host Drivers A blue screen occurred after running an application for
2-3 hours with a Dialogic
®
DMV600BTEP Board.
Resolved IPY00028354 34032 56 Host Drivers When the Dialogic
®
D/480JCT Board is assigned an
interrupt of 45, it causes genload to fail.
Resolved IPY00009527 34921 56 Host Drivers A blue screen occurred after stopping the system
running on a Q10000 chassis.
Resolved IPY00009015 32108 18 Host Drivers The dx_stopch( ) function does not return with a
completion event on several channels.
Resolved IPY00032258 36810 95 Host Install Silent install is flagging itself as completed even
though it still requires a reboot.
Resolved IPY00030892 35704 65 Host Install The cleanup utility does not remove the IPMedia
service.
Resolved IPY00028521 36081 70 Host Install The QSB-U2 media load is not available in the pull
down menu in the Trunk Configuration tab of DCM
under the media load selections for the Dialogic
®
DMV1200BTEP Board.
Resolved IPY00028506 36209 74 Host Install Service Update 65 cannot be installed as an update
install. When you Start Services, DCM gives the errors
“Failed to Detect Boards”, “Error Configuring the TDM
Bus”.
Resolved IPY00028472 36043 70 Host Install After upgrading from Service Update 62 to Service
Update 64, the Registry keys and the DCM About
dialog box still indicate SU 62.
Resolved IPY00019757 31086 -- Host Install When installing the Dialogic
®
System Release
Software, pressing F1 for online help on any of the
install screens results in an error. To access online
help, go to the root directory on the CD and double-
click on install.hlp. This error message does not
negatively affect the rest of the software installation; all
files are properly installed.
Resolved IPY00012763 28122 -- Host Install Uninstalling Dialogic
®
System Release 5.1.1 will
cause an existing CT-Connect install to fail.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description