User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 324
Dialogic Corporation
Resolved IPY00008374 32601 18 Protocols The gc_SetChanState( ) function fails to return a
completion event or error indication when using the
pdk_us_mf_io protocol on a Dialogic
®
DM/V960A-4T1
Board.
Resolved IPY00008220 34972 56 Protocols When using the pdk_us_mf_io protocol, digits from the
previous call are returned in ANI.
Resolved IPY00008138 32978 25 Protocols DPNSS firmware doesn't answer to an EEM(C) *89B#
message (Add-On Validation for conference support).
Resolved IPY00007955 17567 18 Protocols With the Dialogic
®
D/240SC-T1 Board, the 4ESS
protocol does not support multiple restart.
Resolved IPY00007716 27336 18 Protocols When using the ETSI option to drop a call by directly
sending a RELEASE instead of a CALL
DISCONNECT message, the response is “REL” but
should be “REL COMPL”.
Resolved IPY00007573 29445 18 Protocols The gc_MakeCall( ) function “timeout” parameter with
pdk_us_mf_io times out after a maximum of 45
seconds when using wink start protocol.
Resolved IPY00007327 30233 56 Protocols With the pdk_mx_r2_io protocol, if the E1 cable is
disconnected and reconnected, the application does
not receive all the GCEV_UNBLOCKED events.
Resolved IPY00006823 35851 70 Protocols When using the pdk_us_mf_io protocol, the firmware
crashes when CAS_Seize is similar to a wink signal.
Resolved IPY00006811 36584 92 Protocols The pdk_us_ls_fxo protocol fails to notify the PDK
library that the disconnected call has been already
released, which prevents the application from
dropping the call when a new incoming call is pending.
Resolved IPY00006809 34543 56 Protocols When CDP_IN_DNIS_ST_Needed = 0, the
pdk_e1_cas_io protocol should not issue timed-out
error while waiting for DNIS.
Resolved IPY00006804 34319 37 Protocols If a board is configured using pdk_us_ls_fxs_io.cdp
file and a call is abandoned after the first ring, the
application is not receiving the
GCEV_DISCONNECTED event that is expected.
Resolved IPY00006771 34329 56 Protocols Using Belgium R2 protocol, when configured in
DTMF/MF mode, in the Offered state the
gc_ResetLineDev( ) function does not behave
properly.
Resolved IPY00006769 34478 39 Protocols The default CDP_GrpA_TermToneMask3 for
pdk_cn_r2_io.cdp should be 10 instead of 8.
Resolved IPY00006762 34664 56 Protocols When using E1 line side protocol and calling a busy
station using supervised transfer, you get a disconnect
event for both the consultation CRN and transferred
CRN.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description