User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 330
Dialogic Corporation
Resolved IPY00030890 32415 70 Springware Fax When an ASCII text file is faxed from a Dialogic
®
VFX/41JCT-LS Board and the resolution is set to fine,
the font size of the received document is reduced by
about half of the sent document's font size.
Resolved IPY00030883 32772 70 Springware Fax Tiff header font size when sending fax is reduced on
the received document when faxed from a Dialogic
®
VFX/41JCT-LS Board.
Resolved IPY00030880 35634 84 Springware Fax Fax reception fails when DF_ACCEPT_VRQ is set in
the receive flag and the sending fax machine is PRI-
MPS capable.
Resolved IPY00028611 36204 84 Springware Fax When a Dialogic
®
VFX Board is receiving fax from a
particular fax machine, after it sends DIS, it sometimes
cannot recognize DCS from the remote end and the
call is disconnected with phase E status: “Excessive
HDLC carrier” without retry.
Resolved IPY00028599 35799 65 Springware Fax fx_rcvfax( ) does not terminate when fax call is
disconnected during RNR/RR and there's busy tone.
Resolved IPY00028578 36159 84 Springware Fax During ECM receiving, the board sends an invalid
PPR that is not requesting any frames for resend.
Resolved IPY00028480 36640 95 Springware Fax Dialogic
®
VFX/41JCT-LS Board randomly fails to
receive multi-page inbound fax. The receiving side
responds to the Multi-Page Signal (PPSMPS)
message with a request to repeat last message
(CRP). The sending fax machine repeats the
PPSMPS message two more times, followed by a
disconnect (DCN) message. The Dialogic
®
Fax Library
returns error of EFX_DISCONNECT, and
ATFX_E STAT ( ) returns 127 (which is
EFX_WHYDCNRX see faxlib.h) /* Unexpected DCN
while waiting for DCS/DIS */.
Resolved IPY00028479 35937 70 Springware Fax Dialogic
®
VFX/41JCT-LS Board channel does not
recover from fx_rcvfax( ) operation when the remote
fax is disconnected and there's busy tone.
Resolved IPY00028360 33514 62 Springware Fax An access violation occurs when sending a tiff file
starting from a page number it does not contain. For
example, if you try to send a tiff file beginning at page
3 that only contains 2 pages, the fx_sendfax( )
function called will crash.
Resolved IPY00028351 35775 65 Springware Fax Part of sent image is sometimes missing from
received TIFF file using ECM mode fax receive.
Resolved IPY00028341 35790 108 Springware Fax The fax tx modem signal level from a Dialogic
®
VFX
Board changes (for both send and receive fax) after
dx_playiottdata( ) is used.
Resolved IPY00011005 36213 84 Springware Fax When using SoftFax, legal size documents sent from a
Toshiba fax machine are intermittently split into two
pages.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description