User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 331
Dialogic Corporation
Resolved IPY00010734 34753 56 Springware Fax In ECM fax send operation, the Dialogic
®
VFX/41JCT-
LS Board sets wrong frame count in PPS message
when responding to PPR from remote fax machine.
Resolved IPY00010365 35132 56 Springware Fax The operating system hangs when trying to download
Dialogic
®
D/4PCIUF Boards.
Resolved IPY00009411 32855 70 Springware Fax If a call is placed to a board, and a fax machine is not
presented on the line, the fax log reports a CSID that
appears to be from the last valid fax call on the line.
This results in a Phase E status error 120 = “No fax
machine present on the line”.
Resolved IPY00009099 33444 18 Springware Fax When sending fax to a Xerox Able 1221 fax machine,
Dialogic
®
VFX/JCT fax firmware does not respond to
the NSF/CSI/DIS. This is because the NSF was 67
bytes long but the hdlc buffer was only 64 bytes long.
Resolved IPY00007528 32416 18 Springware Fax Multiple page fax receiving terminates with
EFX_DCNFAXRX = 129 (Unexpected DCN while
waiting for EOM/EOP/MPS) when receiving from a
Canon G3 High Speed Laser 3170MS machine.
Resolved IPY00037483 -- 148 Springware
Firmware
Firmware assert during load test causes boards to
stop responding to driver.
Resolved IPY00033185 -- 108 Springware
Firmware
On Dialogic
®
Springware ISDN 5ESS and 4ESS
protocols, loopback calls from user to network fails.
Resolved IPY00032803 -- 108 Springware
Firmware
Ported PTR 35154 fix from NI2 protocol to DMS
protocol.
Resolved IPY00032794 -- 108 Springware
Firmware
Board rejects incoming calls when a call is
disconnected, but is not released yet in the first
unblocked channel.
Resolved IPY00032266 36735 95 Springware
Firmware
The Dialogic
®
D/41JCT Board fails to detect dial tone
on outbound calls.
Resolved IPY00030911 33413 70 Springware
Firmware
Call progress analysis incorrectly reports faxtone as
PAMD on some occasions.
Resolved IPY00028575 35232 62 Springware
Firmware
With Dialogic
®
D/240JCT-LS Board and NTT ISDN
protocol, channel can be stuck with valid Q.931 call
flow.
Resolved IPY00028544 35104 62 Springware
Firmware
After load testing, cc_Restart(ASYNC) does not
return CCEV_RESTART, and subsequent calls to
cc_Restart( ) return CCEV_RESTARTFAIL.
Resolved IPY00028536 36587 94 Springware
Firmware
ISDN outbound calls fail when using the NI2 protocol
and making back to back calls on a Dialogic
®
Springware Board.
Resolved IPY00028524 35566 65 Springware
Firmware
When running ISDN, if glare scenarios occur where
the application initiates a cc_AnswerCall( ) slightly
after or around the same time that a
CCEV_DISCONNECTED event comes in, an assert
can result on the Dialogic
®
Springware Board.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description