User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 335
Dialogic Corporation
Resolved IPY00007425 32712 62 Springware PBX If a second call comes in after a first caller disconnects
and before the ring off event is generated, the call will
not be answered.
Resolved IPY00028211 33249 56 Springware
Protocols
BRI/PCI firmware stops normal operation and error -1,
ATDV_LASTERR( ) 3 is returned from dt_listen( ).
Resolved IPY00008416 29635 -- Springware
Protocols
Application calling dx_dial( ) to perform call progress
analysis (CPA). Incorrect CPA result of CR_ERROR =
2 (CR_TMOUTON) can be seen under these
conditions:
• Valid SIT tone can be heard on the other end of the
call, but CPA results return CR_ERROR = 2
(CR_TMOUTON).
• Similarly, if a single tone beep is heard on the line
which is within range of any of the 3 SIT
frequencies set in DX_CAP structure, dx_dial( )
again returns CR_ERROR = 2 (CR_TMOUTON).
Resolved IPY00028547 35670 100 Springware PSTN PDK protocol delivers DETECTED/OFFERED event
to the channel even if gc_ReleaseCall( ) was never
called to clean up the previous call on this channel.
Once a new call attempts to be transmitted/received
on this channel, an error occurs.
Resolved IPY00006846 36711 100 Springware PSTN A crash occurred due to corruption in PDKRT library
internal database caused by application.
Resolved IPY00006712 36790 100 Springware PSTN For Dialogic
®
Springware Boards, no
GCEV_MEDIADETECTED event is received when the
first sound heard after a connect is a SIT tone
(frequency 914 Hz).
Resolved IPY00040096 -- 174 Springware Voice Failure to increase media play speed by more than
25% when using dx_adjsv( ) to set the play speed;
the documentation specifies a maximum change of
50%.
Resolved IPY00040052 -- 171 Springware Voice Perfect Call call progress analysis on Dialogic
®
Springware Boards sometimes falsely detects dial
tone and proceeds with dialing while there is no signal
matching for the dial tone criteria.
Resolved IPY00037746 -- 148 Springware Voice An exception occurs when calling
ATDX_CPERROR( ) with RTF logging enabled. When
RTF logging is disabled, the exceptions stopped.
Resolved IPY00030588 27302 -- Springware Voice The firmware asserts when the application calls
dx_stopch( ) to stop dx_rec( ). The firmware assert is
an unexpected interrupt.
Table 9. Issues Sorted By Type, Dialogic
®
System Release 6.0 PCI for Windows
®
(Continued)
Issue Type Defect No.
PTR
No.
SU
No.
Dialogic
®
Product(s) or
Component(s)
Description