User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 377
Dialogic Corporation
Update to Section 5.7.5, Select Resolution for Fax Transmission (IPY00040796)
This section refers to the fx_sendfax( ) sndflag argument resolution settings of
DF_TXRESLO and DF_TXRESHI. There are two new values for the sndflag
argument, DF_TXRES_300_300 and DF_TXRES_200_400. Refer to the update for
Chapter 10, Fax Library Function Reference, for ATFX_RESLN( ),
ATFX_WIDTH( ), fx_rcvfax( ), and fx_sendfax( ) functions below.
Update to Section 6.2, Setting Parameters for Receive Fax
Because of a new feature in the Service Update, a new fax parameter,
FC_MDM_RX_LVL, has been added to allow setting of the fax modem receiver
sensitivity from -43 dBm to -47 dBm. This parameter is supported on Dialogic
®
Springware Fax Boards only. For information about this new parameter, see
Section 1.33, “New Fax Parameter for Modem Receive Level”, on page 99.
Update to Section 6.2.2, Storing Incoming Fax Data (IPY00031917 = PTR# 27337)
The following note should be added under Storing in Multiple TIFF/F Files:
• Note: If fx_sendfax( ) is called to send a multiple-page TIFF/F with
io_phdcont=DFC_EOM, once the first page of the fax is received, a TDX_PHASED event
is issued but no TFX_FAXRECV event is returned. TFX_FAXRECV is returned when all
fax pages are transmitted.
Update to Section 6.3.8, Resolution for Storing Incoming Fax Data (IPY00040796)
This section refers to the fx_rcvfax( ) rcvflag argument resolution settings of
DF_RXRESLO and DF_RXRESHI. There are two new values for the rcvflag
argument, DF_RXRES_300_300 and DF_RXRES_200_400. Refer to the update for
Chapter 10, Fax Library Function Reference, for ATFX_RESLN( ),
ATFX_WIDTH( ), fx_rcvfax( ), and fx_sendfax( ) functions below.
Update to Section 6.3.8, Resolution for Storing Incoming Fax Data (PTR# 33036)
The following should be added as a note in Section 6.3.8, Resolution for Storing
Incoming Fax Data:
• Note: On Dialogic
®
DM3 Boards, you cannot change the resolution of an incoming fax.
The resolution specified for fax transmission is used for fax reception.
Update to Section 8.3.2, DF_ASCIIDATA Field Descriptions (IPY00037855)
In Table 12, DF_ASCIIDATA Fields, the description of the font field states that the
default fax font provides 10 characters per inch spacing. This statement should be
changed as follows:
The default fax font character spacing may differ on various Windows
®
operating system
releases depending on the OEM font supplied on the particular system.
Updates to Section 8.6.2, DF_IOTT Field Descriptions (IPY00040796)
In Table 14, DF_IOTT Fields, the description of the io_resln field should have two
more values:
• DF_RES_300_300 - 300 (horizontal) x 300 (vertical) resolution (DM3 Boards only)
• DF_RES_200_400 - 200 (horizontal) x 400 (vertical) resolution (DM3 Boards only)
The description of the io_width field should have one more value:
• DF_WID2592 - 2592 pixels per line (only for vertical resolution DF_RES_300_300,
DM3 Boards only)