User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 386
Dialogic Corporation
3.4.14 Dialogic
®
Global Call IP Technology Guide
Update for IP support on Dialogic
®
DI0408LSAR2 Boards
Because of a new feature in the Service Update, Voice over IP (VoIP) capability is now
supported on Dialogic
®
DI0408LSAR2 Switching Boards. The Dialogic
®
Global Call
IP Technology Guide does not currently include any information about DI0408LSAR2
Boards. For information about this feature, including configuration information, see
Section 1.45, “IP Support on Dialogic
®
DI0408LSAR2 Boards”, on page 152 and
14 0x0E Normal clearing
15 0x0F Network alarm
16 0x10 Pickup
17 0x11 Protocol error
18 0x12 Redirection
19 0x13 Remote termination
20 0x14 Call rejected
21 0x15 Special Information Tone (SIT)
22 0x16 SIT Custom Irregular
23 0x17 SIT No Circuit
24 0x18 SIT Reorder
25 0x19 Transfer
26 0x1A Unavailable
27 0x1B Unknown cause
28 0x1C Unallocated number
29 0x1D No route
30 0x1E Number changed
31 0x1F Destination out of order
32 0x20 Invalid format
33 0x21 Channel unavailable
34 0x22 Channel unacceptable
35 0x23 Channel not implemented
36 0x24 No channel
37 0x25 No response
38 0x26 Facility not subscribed
39 0x27 Facility not implemented
40 0x28 Service not implemented
41 0x29 Barred inbound
42 0x2A Barred outbound
43 0x2B Destination incompatible
44 0x2C Bearer capability unavailable
Cause Value
(Decimal)
Cause Value
(Hex)
Description
Note: The cause values in this table are ORed with the value 0xC0, which identifies them as firmware-related
cause values.