User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 396
Dialogic Corporation
Update to Section 4.1.7, Retrieve the Network Call Reference Value (CRV)
(PTR# 32418)
In Section 4.1.7, Retrieve the Network Call Reference Value (CRV) on page 100,
the first note incorrectly references a function called gc_GetCRV( ). There is no such
function. The correct function name is gc_GetNetCRV( ).
Update to Section 4.4.1, Alarm Handling for DM3 Boards
In Section 4.4.1, Alarm Handling for DM3 Boards beginning on page 137, the
following alarms are incorrectly listed as supported alarms:
• DTE1_DCHAN_CFA
• DTE1_DCHAN_CFAOK
• DTT1_DCHAN_CFA
• DTT1_DCHAN_CFAOK
These alarms are not supported and therefore should not be listed.
Update to Section 8.2.2, gc_AnswerCall( ) Variances for ISDN (PTR# 35844)
In Section 8.2.2, gc_AnswerCall( ) Variances for ISDN beginning on page 178,
under the “Springware-specific variances” subheading, the last sentence incorrectly
states “The application should restart the timeslot using gc_ResetLineDev( ) to
handle this glare condition.” The sentence should read: “The application should restart
the timeslot by issuing a gc_DropCall( ) followed by a gc_ReleaseCallEx( ) to handle
this glare condition.”
Update to Section 8.2.13, gc_GetNetCRV( ) Variances for ISDN (PTR# 32418)
In Section 8.2.13, gc_GetNetCRV( ) Variances for ISDN on page 185, the first note
incorrectly references a function called gc_GetCRV( ). There is no such function. The
correct function name is gc_GetNetCRV( ).
Update to Chapter 11, ISDN-Specific Event Cause Values (IPY00041046)
The following information should be added to Table 54, Firmware-Related Cause
Values When Using DM3 Boards:
Cause
Value
(Decimal)
Cause
Value
(Hex)
Description
45 0x2D Normal unspecified
46 0x2E Req timed out
47 0x2F Remote retrieve
48 0x30 Remote reconnect
49 0x31 Local timeout
50 0x32 Ack
51 0x33 No ringback
52 0x34 SIT vacant circuit
53 0x35 SIT operator intercept
54 0x36 SIT no circuit interlata
55 0x37 SIT reorder interlata
56 0x38 SIT ineffective other