User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 401
Dialogic Corporation
Update to Section 4.6.5, Setting the Message Waiting Indicator, for Nortel Meridian 1
In Section 4.6.5, Setting the Message Waiting Indicator, the last paragraph (on
page 125) should be ignored. The ability to determine the state of the Message
Waiting Indicator is not supported for Nortel Meridian 1 systems.
3.4.23 Dialogic
®
PBX Integration Software Reference
Updates for implementation of ROLM Call Waiting LED
Because of enhancements introduced in the Service Update, the d42_indicators( )
function can now return the LED status of the Call Waiting LED for the ROLMphone
400.
On the d42_indicators( ) function reference page (page 44), in the Description
subsection, the list showing the number of indicators on each PBX type has an
incorrect value for Siemens/ROLM. The value shown is 35; the correct value is now
36. In addition, the figure at the top of page 50 should be replaced by the figure in
Section 1.58, “Implementation of ROLM Call Waiting LED”, on page 227 of this
Release Update.
3.4.24 Dialogic
®
Standard Runtime Library API Library Reference
There are currently no updates to this document.
3.4.25 Dialogic
®
Standard Runtime Library API Programming
Guide
There are currently no updates to this document.
3.4.26 Dialogic
®
Voice API Library Reference
New function
The dx_resetch( ) function is now supported in Dialogic
®
System Release 6.0 PCI for
Windows
®
. The dx_resetch( ) function recovers a channel that is “stuck” (busy or
hung) and in a recoverable state, and brings it to an idle and usable state. For further
information, see Section 1.5, “Dialogic
®
DM3 Media Channel Reset Capability (Stuck
Channel Recovery)”, on page 45 of this Release Update.
Functions not supported
The r2_creatfsig( ) and r2_playbsig( ) functions, which were previously provided for
backward compatibility only, are no longer supported. All references to these functions
should be deleted. R2MF signaling is typically accomplished through the Dialogic
®
Global Call API.
Update to ATDX_CRTNID( ) function
Because of enhancements introduced in the Service Update, the ATDX_CRTNID( )
function is now supported on Dialogic
®
DM3 Boards with new tone IDs. For
information about this feature, see Section 1.8, “Enhanced Special Information Tones
on Dialogic
®
DM3 Boards Using Voice and Global Call APIs”, on page 55 and