User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 402
Dialogic Corporation
Section 1.59, “Enhanced Special Information Tone Frequency Detection on Dialogic
®
DM3 Boards”, on page 229 of this Release Update.
Update to dx_createtone( ) function
Because of a new feature in the Service Update, the dx_createtone( ) function can
be used with the new custom special information tones (SITs) described in
Section 1.8, “Enhanced Special Information Tones on Dialogic
®
DM3 Boards Using
Voice and Global Call APIs”, on page 55 of this Release Update.
Update to dx_deletetone( ) function
Because of a new feature in the Service Update, the dx_deletetone( ) function can
be used with the new custom special information tones (SITs) described in
Section 1.8, “Enhanced Special Information Tones on Dialogic
®
DM3 Boards Using
Voice and Global Call APIs”, on page 55 of this Release Update.
Update to dx_dial( ) function (PTR# 36660)
The following information should be added to the dx_dial( ) function, dialstrp
parameter description:
The maximum dial string size (number of digits) is 275 for Dialogic
®
DM3 Boards and 200 for
Dialogic
®
Springware Boards.
Update to dx_getdig( ) function (IPY00038453)
For Dialogic
®
DM3 Boards, the return value of dx_getdig( ) in synchronous mode has
been changed to return 0 instead of 1 when there are no digits in the buffer. The NULL
character in the digit string ‘dg_value’ is no longer counted as a digit. Similarly, when
dx_getdig( ) returns the number of digits, the terminating NULL is no longer added to
the number of digits. (The NULL was previously counted in the numdig return value
calculation, but since it is not a digit, the NULL is no longer included.)
For Dialogic
®
Springware Boards, the terminating NULL is included in the number of
digits. So for Springware Boards, dx_getdig( ) still returns 1 when there are no digits
in the buffer.
Update to dx_querytone( ) function
Because of a new feature in the Service Update, the dx_querytone( ) function can be
used with the new custom special information tones (SITs) described in Section 1.8,
“Enhanced Special Information Tones on Dialogic
®
DM3 Boards Using Voice and
Global Call APIs”, on page 55 of this Release Update.
Update to dx_setevtmsk( ) (IPY00038053)
The following information should be added to the description of the mask parameter:
User defined tones that are associated an optional digit (dx_addtone( )) have digit
reporting enabled by default in Dialogic
®
System Release 6.0 PCI for Windows
®
. The
user defined tones digit reporting can be turned off by using dx_setevtmsk( ) with
DM_DIGOFF mask. To reactivate digit reporting, use dx_setevtmsk( ) with
DM_DIGITS mask.
Updates to Events chapter
In the Call Status Transition Events section, the DE_DIGOFF event (Dialogic
®
DM3
Boards and Dialogic
®
Springware Boards) is not supported and should be removed
from the documentation (IPY00033772).
With the Service Update, a time stamp has been added to the DE_TONEON and
DE_TONEOFF events for Dialogic
®
DM3 Boards (supported on Dialogic
®