User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 404
Dialogic Corporation
For information on running transaction record on a single board, see the technical note posted on
the Dialogic
®
web site at:
http://www.dialogic.com/support/helpweb/dxall/tnotes/legacy/dlsoft/tn253.htm
Update to Section 10.6, Fixed-Line Short Message Service (SMS)
This section erroneously states that SMS is not supported on Dialogic
®
Springware
Boards. SMS is supported on Springware Boards.
Fixed-line SMS solutions can be created using the standard Telcordia Technologies
(formerly Bellcore) ADSI specification or using the ETSI-FSK specification ETSI ES
201 912. On Springware Boards, to set the voice channel to ETSI compatibility,
specify the two-way FSK transmit framing parameters in the voice.prm file. For more
information on these parameters, see the Dialogic
®
Springware Architecture Products
on Windows
®
Configuration Guide.
Update to Section 10.7.2, Library Support on Springware Boards
Fixed-line short message service (SMS) is supported on Dialogic
®
Springware
Boards. The information in this section should be updated as follows:
Dialogic
®
Springware Boards support ADSI one-way, two-way FSK, and fixed-line short message
service (SMS).
The following voice library functions and data structures support this functionality on Springware
Boards:
dx_RxIottdata( ) function
Receives ADSI data on a specified channel.
dx_TxIottdata( ) function
Transmits ADSI data on a specified channel.
dx_TxRxIottdata( ) function
Starts a transmit-initiated reception of data (two-way ADSI) on a specified channel.
ADSI_XFERSTRUC data structure
Stores information for the transmission and reception of ADSI data. It is used by the
dx_RxIottdata( ), dx_TxIottdata( ), and dx_TxRxIottdata( ) functions.
DV_TPT data structure
Specifies a termination condition for an I/O function; in this case, dx_RxIottdata( ),
dx_TxIottdata( ), or dx_TxRxIottdata( ). DX_MAXDATA termination condition is not
supported on Springware Boards.
ATDX_TERMMSK( ) function
Returns the reason for the last I/O function termination. TM_MAXDATA is not supported on
Springware Boards.
To determine whether your board supports FSK, use dx_getfeaturelist( ) to return information
about the features supported in the FEATURE_TABLE structure; the ft_play field, FT_ADSI bit, is
used to indicate FSK support on Springware Boards.
Update to Section 13.1.5, Retrieving Tone Events (PTR# 32681)
The following should be added as the last paragraph of this section:
Cadence tone on events are reported differently on Dialogic
®
DM3 Boards versus Dialogic
®
Springware Boards. On DM3 Boards, if a cadence tone occurs continuously, a DE_TONEON event
is reported each time a match is detected. On Springware Boards, only the first DE_TONEON