User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 54
Dialogic Corporation
• This feature does not address reset of IP media channels on Dialogic
®
DM/IP Boards.
It only addresses the reset of voice channels on DM/IP Boards.
• The reset may not succeed if CPU utilization on the host system is close to 100
percent. It is recommended that the CPU usage be at a reasonable level (less than 70
percent) before you attempt a channel reset.
1.5.4 Documentation
The online bookshelf provided with Dialogic
®
System Release 6.0 PCI for Windows
®
contains information about all system release features including features for application
development, configuration, administration, and diagnostics.
For more information about the Dialogic
®
Voice API, see the following documents:
• Dialogic
®
Voice API Programming Guide
• Dialogic
®
Voice API Library Reference
For more information about the Dialogic
®
Continuous Speech Processing (CSP) API, see
the following documents:
• Dialogic
®
Continuous Speech Processing API Programming Guide
• Dialogic
®
Continuous Speech Processing API Library Reference
1.6 AMD Opteron Server Support
With the Service Update, Dialogic
®
System Release 6.0 PCI for Windows
®
has been
validated for use with Advanced Micro Devices, Inc. (AMD) Opteron server processors.
1.7 Global DPD Enabled on Dialogic
®
Springware
Boards
With the Service Update, Global Dial Pulse Detection (DPD) is now available by default
via software. Previously, this feature had to be enabled from the factory or by ordering a
separate GDPD enablement package to enable DPD on a board.
Global DPD is supported on Dialogic
®
Springware Boards, such as Dialogic
®
JCT Media
Boards and Dialogic
®
D/4PCIU Media Boards. Global DPD is not supported on Dialogic
®
D/42JCT and D/82JCT PBX Integration Boards or on Dialogic
®
DM3 Media Boards.
For information about implementing Global DPD, see the Dialogic
®
Voice API
Programming Guide.