User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 72
Dialogic Corporation
ML
Media Loads/Features Supported
Voice Only Fax Conferencing Only
Basic
Voice
Transaction
Record
Enhanced
Coders
TrueSpeech
Enhanced Echo
Cancellation
‡
CSP
CSP Streaming
to CT Bus
FSK
Fax
Conferencing
Parties
Conferencing -
Tone Clamping
Conferencing -
Echo Cancellation
Dialogic
®
DMV300BTEPEQ (Single Span Board)
UL1 3030303030303030123030 -
ML530-------30---
ML10 30 30 30 30 30 30 30 30 - 32 32 32
Dialogic
®
DMV600BTEPEQ (Dual Span Board)
UL1 606060606060606016606060
UL2 909090 - - - - 90 6 484848
Dialogic
®
DMV1200BTEPEQ (Quad Span Board)
UL1 120 120 120 120 120 120 120 120 12 30 30 -
UL2 120 120 - - - - - 120 12 120 120 -
UL3 120 120 120 - - - - 120 8 36 36 36
ML2 150 150 150 150 - 150 - - - - - -
ML5120-------30---
ML5B 120 120 120 - - 120 120 - 12 - - -
ML9B - - - - - - - - - 160 160 160
ML9C----- ---576--
ML9D - - - - - - - - 270 270 -
ML10 120 120 120 - - 120 120 - 54 54 54
ML10B 120 120 - - - - 120 - 120 120 120
Notes: For more information about media loads, refer to the Dialogic
®
DM3 Architecture PCI Products on Windows
®
Configuration
Guide.
Features within a resource group (headings marked as Voice Only, Fax, or Conferencing Only) are inclusive. Features across
resource groups are additive. For example, on the Dialogic
®
DMV600BTEPEQ Board using UL1, there are 60 total voice
resources, 16 fax resources, and 60 conferencing resources. This means that any combination of the listed voice resources (Voice
Only subheadings marked as Basic Voice, Transaction Record, Enhanced Coders, TrueSpeech, Enhanced Echo Cancellation,
CSP, CSP Streaming to CT Bus, and FSK) can be used up to a total of 60. For example, 30 Basic Voice plus 10 Enhanced Coders
plus 10 TrueSpeech plus 10 CSP Streaming to CT Bus. In addition to these various voice resources, the UL1 media load can use
16 fax resources and 60 conferencing resources (with Tone Clamping and Echo Cancellation) simultaneously.
‡ Default configuration is EEC (enhanced EC, 32 ms) for CSP supported ML, unless otherwise indicated or set in the component
named [0x2c] in the respective CONFIG file. You can only change it to a lower EC tail length, by changing the CSP parameter
0x2c03 accordingly in the respective CONFIG file. Conferencing EC, however, will always be 16 ms, regardless of the EC
parameter setting.