User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 77
Dialogic Corporation
Tue Jan 16 17:30:58 2007
TX Frame: Time = 2428.372
Command=1 SAPI=0x00
TEI=0x00
0x01 0xe6 Receive Ready
Hex Dump:
02 01 01 e6
Enqueue Failed
Tue Jan 16 17:30:58 2007
RX Frame: Time = 2428.372
Command=1 SAPI=0x00
TEI=0x00
0xe6 0xce Information
PD=0x08 Dest=0 CR=0x1e2a
CALL DISCONNECT(0x45)
1: CAUSE(0x08)
2: IE Length(0x02)
3: 1------- Extension Bit
-00----- Coding Standard
---0---- Spare
----0010 Location
4: 1------- Extension Bit
-0010000 Cause Value
Hex Dump:
02 01 e6 ce 08 02 1e 2a 45 08
02 82 90
Enqueue Failed
In order to avoid loss of trace information and provide more robust performance of the
ISDNtrace tool, the -s command line option should be specified to disable trace output
to STDOUT whenever the capture of trace information for a large amount of calls is
being performed, or “enqueue fail” failures occur.
1.16.2 Supported Boards
The following boards support this feature:
• Dialogic
®
DM3 Network Interface Boards
1.16.3 Documentation
The online bookshelf provided with Dialogic
®
System Release 6.0 PCI for Windows
®
contains information about all system release features including features for application
development, configuration, administration, and diagnostics.
For more information about the ISDNtrace tool, see the Dialogic
®
System Software
Diagnostics Guide.
1.17 Support for Dialogic
®
DI/0408-LS-AR2 Board
With the Service Update, the Dialogic
®
DI/0408-LS-AR2 Board is now supported in Dual
Processor systems.