User`s guide

Dialogic
®
System Release 6.0 PCI for Windows
®
Release Update, Rev 62 — January 30, 2008 87
Dialogic Corporation
1.23.2 Supported Boards
The following boards support this feature:
• Dialogic
®
DM/V1200BTEP Media Boards
• Dialogic
®
DM/V600BTEP Media Boards
• Dialogic
®
DM/V3600BP Media Boards
1.23.3 Sample Output Logs
The following are examples and explanations of the converted output:
R2MF Outbound
This event is logged when an R2MF tone has been transmitted by a channel that is being
traced. This tone would be considered a “backward” tone if the channel is the called party,
or a “forward” tone if the channel is the calling party. The tone value given represents one
of the 15 possible R2MF tone numbers in the forward or backward tone set. The tone
numbers (1-15) represent tone pair frequencies defined in various ITU standards.
R2MF Inbound
This event is logged when an R2MF tone has been received by a channel that is being
traced. This tone would be considered a “backward” tone if the channel is the calling party,
or a “forward” tone if the channel is the called party. The tone value given represents one
of the 15 possible R2MF tone numbers in the forward or backward tone set. The tone
numbers (1-15) represent tone pair frequencies defined in various ITU standards.
CAS RX
This event is logged when a new ABCD bit pattern is detected on the channel being
traced. Any change in any of the ABCD bits will cause a new CAS RX event to be
generated. The “PreTransition Code” is the value of the ABCD bits (bits 0-3) and the bit
mask (bits 4-7) prior to the change. The “PostTransitionCode” represents the ABCD bits
File Line Level Ser Bo... C... SDL Call TxRx Data
N/A 1 DEBUG N/A 3 11 RSMF
Un TX:1000
RX:1011
R2MF tone (OUTBOUND):
Trunk=3 Chan=11 Tone=7
File Line Level Ser Bo... C... SDL Call TxRx Data
N/A 1 DEBUG N/A 3 11 RSMF
Un TX:1000
RX:1011
R2MF tone (INBOUND):
Trunk=3 Chan=11 Tone=5
File Line Level Ser Bo... C... SDL Call TxRx Data
N/A 1 DEBUG N/A 3 11 CAS
Un TX:0000
RX:1001
CAS Transition (RX)
PreTransition Code:
0x1
PostTransition Code:
0x1