User Manual

AUX Source Settings

The auxiliary input has settings for gain, bass, mid and treble in order to optimize sound.

Volume (Gain) should be adjusted if the audio level from the auxiliary device is too low or to high. If you hear distorted

audio while playing the auxiliary device, you need to reduce (-) the gain. If you notice that the audio is too quiet then the

gain setting should be increased (+). Default settings are "50" ("68" for gain) and values may be adjusted in increments

between 01-99. Bass, Mid and Treble should be adjusted to compensate for the acoustic presets of the radio.

Note: If you are using an AUX device that is using the vehicle’s power source and not its own battery, you may have to use a

GROUND-LOOP isolator to avoid grounding and engine noise.

DISC 1 DISC 2 DISC 3 DISC 4

Volume

setting

Bass EQ

setting

Mid EQ

setting

Treble EQ

setting