User Manual

60 Chapter 14 Configuring Users
Configuring a User: Web Interface
Use this section to configure users with from the web interface.
1. Access the web interface by entering the device server IP address in a
browser’s URL window.
2. Log on to the device server as root. The default password is dbps.
3. Select Configure and then Users from the menu.
4. Choose Add User.
5. Enter a name and then choose Submit
6. Choose the new user from the Name column.
7. Configure the user as required.
8. Click Submit.
9. To return to the main User menu, click User from the Menu again.
Commands for Configuring a User
Use the commands listed below as well as find specific examples and
complete parameters from the Digi One/PortServer TS Command
Reference.
• set user (name=)
• newpass to assign a password
• default access=menu to configure a user for a menu
• autoconnect to automatically connect a user
• remove to remove a user from the user table
Default
access type
Defines the type of access the user is
restricted to. Menu, command line, autocon-
nect, and outgoing and netservice are the
types.
This feature is configurable from the web
interface.
defaultaccess
Menu
access
Defines the menu that is to be presented to a
user with menu access.
This feature is configurable from the web
interface.
menu
Port access
Defines the number of outbound ports a user
connected over the LAN can access at one
time.
This feature is not configurable from the web
interface.
maxsessions
PPP Defines PPP-related parameters for the user.
There are too
many fields to list
here. See the set
user command for
more information.
Routing
updates
Defines whether RIP routing updates are for-
warded over the link to this user.
netrouting