User Manual

Chapter 15 Configuring Console Management 67
4. To configure the power unit, choose Edit Power Unit hyperlink under the
power unit you have added.
5. Choose the manufacturer, enter the number of outlets, and set the
alarm thresholds. Choose Submit.
The power unit is configured.
Note: The alarm theshold monitors the electric current on an outlet. It
warns the user by sounding an audible warning when a specific amper-
age level is reached on an outlet.
Devices Supported: The Digi PortServer TS 8/16 supports the following
Baytech power units: RPC 4, 6, 10, 12, 16, 18, 22, 27, and 28. See the
Baytech website for further details at: http://www.baytech.net.
Configuring Users
Individual users must already be entered in the system before they can be
assigned to the power units. You can add users by going to Configure >
Users and filling in the required fields. To assign a user to a power unit, do
the following:
1. From the menu, choose Configure > Power > and the Outlet you are
configuring. The Outlet is listed in the Plugged Into column.
2. In the Power Management Users section, select Assign User.
3. From the drop down menu, choose the user you want to assign to man-
age the power unit.