Specifications

28 DC-530 Operation Manual
7. To print a label showing the total, press the * PRINT key.
Figure 5-1. Total Accumulation Label Sample
8. This will also clear the accumulation register. The ACC (Accumulation) indicator lamp will no longer
be illuminated.
9. To clear the Unit Weight, remove all weight from the scale platter and press the C (Clear) key.
5.5.5 Normal Counting Mode - Part Subtraction
Just as you can accumulate total quantities by adding parts to the scale, you can also count by removing parts
from the scale, subtracting them from the total you began with.
1. Conduct a sampling process (Section 5.5.1) to determine the Unit Weight of the pieces and enter a
known tare weight, or place the empty container on the scale to perform the tare function (Section 5.4).
Alternatively, you can enter the Item Code of an item previously programmed into memory and press the
# [CODE] key to recall the data. If you enter an Item Code that is not currently programmed into the
scale’s memory, the message
ITEM NOT FOUND will appear at the bottom of the display. For more
information on how to program item data into the DC-530’s memory, see Section 6.1.
2. Place Container 1 (full of parts) on the scale and press the + (Plus) key to store the total in Container 1.
The Acc (Accumulation) indicator lamp will now be illuminated. The display will show the total
quantity of pieces accumulated for 3 seconds, then return to the Normal Counting Mode screen.
.