Specifications

32 DC-530 Operation Manual
6. When the sample weight is within the required range, the scale will recompute the Unit Weight and
return to the TEP Sampling screen. The scale display will show the new total Weight, Unit Weight, and
number of Pieces. It will also now indicate that you have been
SAMPLING 2 TIMES.
7. Continue resampling by repeating Step 5, adding another sample below the amount shown on the TEP
Mode display. If the Auto-Recomputing SPEC is not set to 1: Auto, you will need to press the PCS key
to recompute the Unit Weight after each sample is added. Repeat the procedure until the scale reads
SAMPLING 9 TIMES.
8. As you continue sampling, at the bottom of the display the DC-530 will show a bar graph of the Unit
Weight curve it is developing. After the ninth sample, the scale’s display will turn red indicating that the
sampling operation is complete.
9. Remove all the sample parts from the platter. The DC-530 will now calculate and display the maximum
Safe Quantity Limit that can be counted without error in the Limit field.
10. You can now begin counting operations by placing a quantity of the pieces to be counted on the