Specifications

40 DC-530 Operation Manual
2. Enter the three digit Item Code for an item you have previously programmed into the DC-530’s item
memory and press the
# key. The scale will recall the Unit Weight and Tare Weight (if any) previously
programmed for ths item.
3. Place the container, box, or item to be tared on the scale platform and press the TARE key. The weight
display will now show
0 and the Net and Zero indicator lamps will illuminate.
4. Press the UNIT WEIGHT key. The screen will flash red and then indicate that the Item Code you have
entered already exists in memory.
After a moment, the screen will ask you to confirm that you want to update the data for this existing Item
Number.
5. To exit back to the Item Registration screen without updating the Tare Weight of the existing Item Code,
press 9. To change the Tare Weight associated with this Item Code from the weight previously
programmed in memory to the new Tare Weight from the platform, press 1. The scale will confirm that
it is updating before returning you to whichever Counting Mode screen you began at, either Normal
Counting Mode or TEP Mode.
6.2.3 Update an Existing Item From the Programming Mode
1. From the Counting Mode screen (either Normal Counting Mode or TEP Mode) press the MODE key to
move to the Mode Menu.
2. In the Mode Menu Screen, press the 2 key to enter the Item Programming Mode. The upper right hand
part of this screen will show much of the 200 item memory is currently programmed. In the example