Specifications

42 DC-530 Operation Manual
If you press the 1 key to save the changes to the Item Code record the display will turn red and confirm
that the record’s data is updating.
9. When the update is done, the display will return to the Edit Item Code Screen. You can enter another
three digit Item Code to edit or press the TARE key twice to exit the Program Mode and return to the
Mode Menu.
10. Press the 1 key to return to the Weigh Mode.
6.3 Deleting Item Codes
6.3.1 Clearing an Individual Field
To just clear an individual field associated with an Item Code, follow the programming instructions in
Section 6.2.3 above and enter zeroes in the fields you want to clear. Be sure to save your changes at the end of
the programming mode by pressing the * PRINT key.
6.3.2 Deleting a Single Item Code
The following procedure describes the steps used to delete ALL information stored for a specific Item Code (unit
weight, tare weight, and setpoints).
1. At the Counting Mode screen, press the MODE key to enter the Mode Menu.
2. In the Menu Menu Screen, press the 2 key to enter the Program Mode screen. The upper right hand
corner of this screen will show how much of the 200 item memory is currently programmed. (In the
example below, 25 items have already been programmed and 175 can still be entered.)
3. In the Item Programming Screen, press the 2 key to enter the Delete Item Screen.