Specifications

Scale Programming 43
4. Enter the three digit Item Code of the item to be deleted, then press the # key to call up that item. The
scale will display the information stored for that Item Code.
5. Press the C (Clear) key to delete this Item Code. The display will ask the operator to confirm that he
really wants to delete this item.
6. To cancel the deletion of this Item Code, press 9. To complete the deletion of this Item Code, press 1.
The display turn red and will read PLEASE WAIT while carrying out the deletion, then return to the Item
Delete Screen.
7. To exit the Program Mode, press the TARE key twice.
8. Press the 1 key to return to the Weigh Mode.
6.3.3 Deleting All Item Codes
The following procedure describes the steps used to delete ALL of the Item Codes stored in memory.
1. From the Counting Mode screen (either Normal Counting Mode or TEP Mode) press the MODE key to
move to the Mode Menu.
2. In the Mode Menu Screen, press the 2 key to enter the Item Programming Mode. The upper right hand
part of this screen will show how much of the 200 item memory is currently programmed. (In the
example below, 25 items have already been entered, 175 can still be entered.) The procedure below will