User`s manual

Dynamic C User’s Manual digi.com 279
TCP/IP Options
To program and debug a controller across a TCP/IP connection, the
Network Address field
must have the IP address of either the RabbitLink board that is attached to the controller, or
the IP address of a RabbitSys-enabled controller.
To accept control commands from Dynamic C, the
Control Port field must be set to the port
used by the Ethernet-enabled controller. The
Controller Name is for informational purposes
only. The
Discovery button makes Dynamic C broadcast a query to any RabbitLinks or Rab-
bitSys-enabled controllers attached to the network. Any such boards that respond to the broad-
cast can be selected and their information will be placed in the appropriate fields.
Compiler Tab
Click on the Compiler tab to display the following dialog.