User`s manual

Dynamic C User’s Manual digi.com 311
-vp+
-vp-
-wa
-wn
-ws
Description: Verify the processor by enabling a DSR check. This should be disabled if a check of
the DSR line is incompatible on your system for any reason.
Factory Default: Processor verification is enabled.
GUI Equivalent: Check “Enable Processor verification” in the Project Options | Communications
dialog box.
Description: Assume a valid processor is connected.
Factory Default: Processor verification is enabled.
GUI Equivalent: Uncheck “Enable Processor verification” in the Project Options | Communications
dialog box.
Description: Report all warnings.
Factory Default: All warnings reported.
GUI Equivalent: Select “All” under “Warning Reports” in the Project Options | Compiler dialog box.
Description: Report no warnings.
Factory Default: All warnings reported.
GUI Equivalent: Select “None” under “Warning Reports” in the Project Options | Compiler dialog
box.
Description: Report only serious warnings.
Factory Default: All warnings reported.
GUI Equivalent: Select “Serious Only” under “Warning Reports” in the Project Options | Compiler
dialog box.