User`s manual

322 digi.com Command Line Interface
-d
-fi Flash.ini PathName
-pb PilotBiosPathName
-pw
Description: Run Ethernet discovery to find RabbitLink or RabbitSys-enabled boards on
a local area network (LAN). Don’t load the .bin file. This option is for
information gathering and must appear by itself with no other options and
no binary image file name.
RFU GUI
Equivalent:
From the Setup | Communications dialog box, click on the “Use TCP/IP
Connection” radio button, then on the “Discover” button.
Example:
clRFU -d
Description: Select a new file that Dynamic C will use to externally define flash.
Default: flash.ini
RFU GUI
Equivalent:
From the “Choose File Locations...” dialog box, visible by selecting Setup |
File Locations, type in a pathname or click on the ellipses radio button to
browse for a file.
Example:
clRFU myProgram.bin -fi myflash.ini
Description: Select a new secondary loader.
Default: \bios\pilot.bin
RFU GUI
Equivalent:
From the Setup | Boot Strap Loaders dialog box, type in a pathname or click
on the ellipses radio button to browse for a file.
Example:
clRFU myProgram.bin -pb mySecondaryLoader.bin
Description: Passphrase for TCP/IP loader when using a RabbitLink.
Default: RabbitLink always prompts for a passphrase. Press “Enter” if no passphrase
has been set.
RFU GUI
Equivalent:
None.
Example:
clRFU -pw mypassphrase