User`s manual

352 digi.com
-fi Flash.ini PathName
-vp+
-vp-
-usb+
Description: Select a new file that Dynamic C will use to externally define flash.
Default: flash.ini
RFU GUI
Equivalent:
From the “Choose File Locations...” dialog box, visible by selecting the
menu option
Setup | File Locations, type in a pathname or click on the
ellipses radio button to browse for a file.
Example: clRFU myProgram.bin -fi myflash.ini
Description: Verify the presence of the processor by using the DSR line of the PC serial
connection.
Default: The processor is verified.
RFU GUI
Equivalent:
From the “Communications Options” dialog box, visible by selecting
Setup | Communications, check the “Enable Processor Detection” option.
Example: clRFU myProgram.bin -vp+
Description: Do not verify the presence of the processor.
Default: The processor is verified.
RFU GUI
Equivalent:
From the “Communications Options” dialog box, visible by selecting
Setup | Communications, uncheck the “Enable Processor Detection” option.
Example: clRFU myProgram.bin -vp-
Description: Enable use of USB to serial converter.
Default: The use of the USB to serial converter is disabled.
RFU GUI
Equivalent:
From the “Communications Options” dialog box, visible by selecting
Setup | Communications, check the “Use USB to Serial Converter” option.
Example: clRFU myProgram.bin -usb+