User`s guide

Displays
5-9
6700-A2-GY31-70
July 1999
Commands
Select Commands from the Network Map menu bar to access the Commands
pull-down menu and the following commands.
 Device Management (DevMgt)
Select DevMgt from the Commands pull-down menu to access the Device
Management window. This menu is inactive (gray) unless a device or site
containing a device is selected. All the devices currently selected appear in
the device selection list. See Chapter 7,
Device Management , for additional
information. Choosing DevMgt does not close the Displays window(s).
 Information (Info)
Select Info from the Commands pull-down menu to open an information
dialog box. The dialog box that appears depends on the current selection:
site, cabinet, carrier, device, or facility line. The Info menu is inactive (gray)
unless a single network element (site, cabinet, carrier, device, hunt group, or
facility line) is selected. See
Information Display in Appendix A, NMS
Windows Conventions , for additional information. Close the Info window to
continue with Displays.
If you press and hold the right mouse button over a facility line, a window
appears containing the facility and circuit names.
 Connectivity
Select Connectivity from the Commands pull-down menu to display the
Connectivity Diagram. The Connectivity Diagram is a topographical
representation of a selected device configured as leased connections. You
must select either a device configured as leased or the facility line to display
the Connectivity Diagram. If the facility line is selected, a Connectivity
Diagram for both endpoints of the line appears. The Connectivity Diagram
can also be displayed from the Carrier Monitor and the Device Management
windows.