User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Displays
5-13
6700-A2-GY31-70
July 1999
Cabinet Monitor
The Cabinet Monitor commands allow you to view the status of all
carrier-mounted devices in a specific cabinet. Select Cabinet Monitor from the
Displays pull-down menu. The Cabinet Monitor window appears using the alert
colors.
The following color schemes apply to this window. See
System Colors
on
page 5-4 for more information on colors.
H The cabinet frame is the same color as the highest alert color for all the
carriers.
H Each carrier appears using the highest alert colors for the devices installed.
H Each device appears using the highest alert color associated with the device.
H Empty slots use the empty carrier slot color and unsupported devices use the
unsupported device color.
H If the device is either suspended or in inventory, the appropriate color
appears.
The menu commands Action and Commands are inactive (gray) until you select
a carrier(s) or the whole cabinet.
The Cabinet field displays the name of the current cabinet.
To change the current name:
" Procedure
1. Choose the arrow to the right of the Cabinet field. The drop-down list box
containing the names of all the cabinets in the network appears.
2. Select a cabinet name. The selected name appears in the Cabinet field.