User`s guide

Displays
5-20
6700-A2-GY31-70
July 1999
 Information (Info)
Select Info from the Commands menu to open an information dialog box.
This menu is inactive (gray) unless one device or the entire carrier is
selected. The dialog box that appears depends upon the current selection.
The Device Information box appears for a single selected device. The Carrier
Information dialog box appears when all devices in the carrier are selected.
 Legend
Select Legend from the Commands menu to display the Legend window. The
Legend window lists the operation status codes used in the Device Activity
boxes found in the graphic display of the carrier.
 Connectivity
Select Connectivity from the Commands menu to display the Connectivity
Diagram. The Connectivity Diagram is a topographical representation of a
selected device configured as leased connections (see page 5-9). You must
select a device configured as leased to display the Connectivity Diagram.
The Connectivity Diagram can also be displayed from the Network Map and
the Device Management windows.
Alert Monitor
Alert Monitor commands allow you to view all the current alerts that network
devices report to NMS and any outstanding beeper alerts. The displayed alerts
can be sorted either by device or by the time of occurrence. From the Alert
Monitor window, you can clear or acknowledge the displayed alert and beeper
alerts.
Select Alert Monitor from the Displays pull-down menu, or select the Alert Monitor
icon in the toolbar. The Alert Monitor window appears with the menus Action,
Sort, and Commands, and a listing of the current alerts reported by the network.
For each line, colors represent the status of listed devices. See System Colors on
page 5-4 for additional information.
Each listing uses three fields of information containing the device name, alert
description, and the time of occurrence.