User`s guide

Displays
5-26
6700-A2-GY31-70
July 1999
Control
Select Control from the Hunt Group Monitor menu bar to access the Control
window. The Control pull-down menu appears listing the commands Make Busy
and Remove Busy. This command is inactive (gray) unless one or more devices
are selected.
 Make Busy
Choose Make Busy from the Control pull-down menu to change the device
configuration to Busied Out. The selected device(s) configuration icon
changes to Busied Out. If any selected device is Busied Out, this command is
inactive (gray).
 Remove Busy
Choose Remove Busy from the Control pull-down menu to change the
device’s Busied Out configuration. The selected device(s) configuration icon
returns to its normal state. If any selected device is not Busied Out, this
command is inactive (gray).
Commands
Select Commands from the Hunt Group Monitor menu bar to access commands
to manage devices, access an information dialog box, and list operation status
codes used in the Device Activity boxes.
 Device Management (DevMgt)
Select DevMgt from the Commands menu to access the Device Management
window. This menu is inactive (gray) unless a device(s) is selected. All
selected device(s) appear in the device selection list. See Chapter 7,
Device
Management
, for additional information.
 Information (Info)
Select Info from the Commands menu to open an information dialog box.
This menu is inactive (gray) unless one device or the entire Hunt Group is
selected. The dialog box that appears depends upon the current selection.
The Device Information box appears for a single selected device. The Hunt
Group Information dialog box appears when all devices in the Hunt Group are
selected.
 Legend
Select Legend from the Commands menu to display the Legend window. The
Legend window lists the operation status codes used in the Device Activity
boxes found in the graphic display of the Hunt Group.
Event Monitor
The Event Monitor is detailed in the COMSPHERE 6700 Series Network
Management System Security Manager Feature Supplement .