User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Statistics
6-23
6700-A2-GY31-70
July 1999
2. Select one of the fields displayed in the list box.
3. Select the Save Selection check box to make the current sort field the
default sort field. The new sort field is used each time the Call Statistics
Detail Display displays. Each user can save a unique sort field for the Call
Statistics Detail Display window. If the Save Selection check box is not
selected, the sort field is used until the Call Statistics Detail Display window is
closed and then the default sort field is restored.
4. Choose OK.
Commands
Use the Commands pull-down menu to access the Print command.
Print
Use Print to print the Call Statistics Detail Display data. This command is
inactive (gray) unless a chart is displayed. See
Printing Statistics
on
page 6-3 for additional information.
In addition to the device list, the Selection Criteria page contains the start date,
end date, the selected days of the week, and the sort key.
Call Fault Detail Display
The Call Fault Detail Display command is used to display the collected call fault
detail information for one or more local dial devices. Select Call Fault Detail
Display from the Statistics pull-down menu to display the Call Fault Detail Display
window.