User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Device Management
7-24
6700-A2-GY31-70
July 1999
Service Profile ID’s
Choose Service Profile ID’s from the Commands pull-down menu to display and
update the ISDN service profile IDs. You can enter up to two IDs per device, with
a maximum of 20 digits per ID. When you choose Service Profile ID’s, the Service
Profile ID’s window appears.
Choose Display to read the Service Profile ID’s from the device.
Enter an ID (maximum 20 digits) in the Service Profile ID 1 or Service Profile
ID 2 field, or type a space in the first position of one of the fields to delete an
existing ID. Choose Update to send your entry to the device.
Reset Device
Choose Reset Device from the Commands pull-down menu to perform a soft
reset of the device.
Reset Call Counter
Choose Reset Call Counter from the Commands pull-down menu to clear a
3900 Series device’s dial backup counter. A 3900 Series device will attempt
a dial backup a maximum of 10 times. No more attempts can be made until the
dial backup counter is cleared.
In addition to using the Reset Call Counter command, the dial backup counter
can be cleared via a dial command, or by performing a reset before issuing
another dial command.