User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Dial Function
8-2
6700-A2-GY31-70
July 1999
The following example shows the Dial window for 3600 Series digital-type
devices.
Selecting a Local Device
Once you access Dial from the Commands pull-down menu or with the Dial icon,
use the Device Name button to select a local device or use a device from a
previous selection. The Device Name button gives you access to the Selection
Browser. Refer to
Device Selection
in Appendix A,
NMS Windows Conventions
,
for additional information on using the Selection Browser.
NOTE:
If you are calling a remote site, either place a maintenance call or select the
remote device as the calling device. If you select a local device for a normal
call, no NMS functions can be performed on the remote device.