User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Reports
10-8
6700-A2-GY31-70
July 1999
Depending on the destination selected, the Contact Configuration Report either
appears online or is printed on the selected printer. Contained in the report are
the Contact Name, Telephone (number), Address, and Comments.
Devices
Use the Devices command to generate a report of all the devices, carriers,
cabinets, and sites configured within the network. The fields on the report differ,
depending on the type of device selected. See
Configuring Network Elements
in
Chapter 4,
Configuration
.
Procedure
1. Select Configuration from the Reports pull-down menu. The Device
Configuration Report window appears.
2. Select the report destination (monitor or printer).
— If the report is to be sent directly to the printer, select Printer in the
Destination box.
— If the report is to be sent directly to the monitor, select Display in the
Destination box.
3. Choose Execute.
Depending on the destination selected, the Device Configuration Report either
appears online or is printed on the selected printer. The report is printed in
sections by devices, carriers, cabinets, and site.