User`s guide

NMS Windows Conventions
A-4
6700-A2-GY31-70July 1999
" Procedure
To select a time (for example, 12:30:00) using the scrolling time function:
1. If you are using a mouse, click on the part of the time (hour, minute or
second) to be modified to highlight it.
If you are using the keyboard, use the Cursor Left or Cursor Right key to
move the cursor to the part of the time you want to highlight.
2. If you are using a mouse, click and hold the left mouse button on the up
arrow button until the hour 12 scrolls into view.
If you are using the keyboard, press and hold the Cursor Up key until the
hour 12 scrolls into view.
3. Repeat this procedure to increment the minute to 30 and the second to 00.
Range Field
The scrolling Range field is used for all applications where you can select from a
range of values. The scrolling Range field is shown below.
Using either the mouse or the keyboard, you can scroll through the range of
values to make your selection.
A range value can be selected through various methods. Options include:
H Using the mouse, click on the Up or Down arrow to increase or decrease one
unit of measure.
H Using the mouse, click on the value displayed in the box. This enables
keyboard processing. Pressing the:
— Up or Down arrow on the keyboard increases or decreases the displayed
value by one unit of measure.
— Home key on the keyboard results in display of the lowest value.
— End key on the keyboard results in display of the highest value.
— Page Up or Page Down key will increase or decrease the displayed value
in increments determined by the maximum range divided by ten.
For example, test duration maximum is 900 units and increments by
90 units.