User`s guide

Configuration
4-4
6700-A2-GY31-70
July 1999
Table 4-1. Common Action Commands from Configuration Menus (2 of 2)
Action
Commands
ProceduresFunctions
Change
Name
Changes the network element’s
name throughout the network
database.
1. Access an existing element
name on the input form.
2. Choose Change Name.
3. Enter the new name in the
dialog box.
4. Choose OK.
Print Prints configuration information
currently stored in the database for
all but Contact List, Device Options
and Device Groups. For Device
Options configuration, the Print
command prints the current device
options displayed in the Edit Area
of the input form or the device
options displayed in the Compare
Device Options List window. For
Contact List and Device Groups,
the Print command prints what is
currently displayed.
1. Access an existing element
name on the input form.
2. Choose Print.
or
1. Complete the input form.
2. Choose Save.
3. Choose Print.
Print All For Contact List, Facility, and
Device Groups, prints the
information currently stored in the
database.
1. Access an existing Contact List
or Device Group name on the
input form.
2. Choose Print All.
or
1. Complete the input form.
2. Choose Save.
3. Choose Print All.
NOTE:
When the COMSPHERE 6700 Series NMS Multiuser Feature is installed,
NMS utilizes a locking mechanism to protect devices and the NMS database.
This locking mechanism prevents a user from saving, deleting, or changing a
record or device information currently accessed by another user. When this
happens, the Save, Delete, and Change Name commands on the Action
menu are gray and inaccessible.
Use the Info command from a configuration menu to display information about a
network element (see
Information Display in Appendix A, NMS Windows
Conventions ). You must select a device before you can access the Info
command.