User`s guide

Configuration
4-6
6700-A2-GY31-70
July 1999
NOTE:
To change an existing contact name in the contact list without changing
the supporting information, use the Change Name command from the
Action menu. Changing the contact name without using the Change
Name command (such as editing the field and then using the Save
command) creates a new contact list record if the entry is a new name, or
it changes the supporting information of an existing contact name.
4. Enter the following information in the fields on the Contact List Configuration
input form by either:
— Using the selection list button to the right of the field to access existing
field entries, or
— Typing the information in the field, then pressing Tab.
Contact Name: The name of the person (maximum 25 characters)
associated with a specific site or device to contact if there is a problem or
question.
Address: Four optional fields (maximum 40 characters each) that contain the
contact’s address.
Telephone: An optional field (maximum 40 characters) that contains the
contact’s complete telephone number.
Comments: An optional field for additional contact information (maximum 40
characters).
NOTE:
The other fields appearing on this form consist of enhancements
provided by the Security Manager feature. This feature is documented in
the
COMSPHERE 6700 Series Network Management System Security
Manager Feature Supplement .
5. Choose Save or one of the other commands from the Action menu (see
Table 4-1).
Configuring a Network Site
Site Configuration commands allow you to create, change, delete, or print site
configuration information used to specify a device’s location.
Use the Action commands (Table 4-1) to complete configuration. You can also
place the site on the Network Map using the Action menu. (See Chapter 5,
Displays , for information on how to place a site using the Network Map display.)