User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Configuration
4-21
6700-A2-GY31-70
July 1999
Comparing Device Options
Use the Compare Device Options command from the Device Options Action
menu to match one set of device options with another. The comparison displays
as a side-by-side view of the two sets of device options. Those device options
that differ are highlighted in yellow. If you print the comparison, an asterisk (*)
prints next to the value in the Right Column that differs from the value shown in
the Left Column. You cannot directly compare device option areas for the same
device.
CAUTION:
If you have made changes to device options, save them to a User File
before you begin the Compare function. Otherwise, your changes to
device options will be lost.
Procedure
1. Select Config from the Main Menu, or select the Device Options icon in the
toolbar and go on to Step 5.
2. Choose Network from the Config menu.
3. Choose Devices from the Network cascading menu.
4. Choose Device Options from the Devices cascading menu.
5. Choose Action from the Device Options menu.
6. Choose Compare Device Options from the Action menu. The Compare
Device Options window appears.