User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Configuration
4-49
6700-A2-GY31-70
July 1999
NOTE:
The Call Security field appearing on this form consists of an
enhancement provided by the Security manager feature. This feature is
documented in the
COMSPHERE 6700 Series Network Management
System Security Manager Feature Supplement
.
User Profile: An NMS system privilege that allows you to define or change
all user login information including User IDs, passwords and system
privileges.
NOTE:
The User Profile privilege is for the administrator.
5. Choose Save or one of the other commands from the Action menu (see
Table 4-1).
Defining the Customer Name
Customer Name commands allow you to create or change the customer name
and the product name which NMS displays in window and report titles.
Procedure
1. Select Config from the Main Menu.
2. Choose System from the Config menu.
3. Choose Customer Name from the System cascading menu. The Customer
Name Configuration input form appears.
4. Type the following information in the fields on the Customer Name
Configuration input form:
Customer Name: The name of your company (maximum 40 characters) that
displays at the top of NMS generated reports.
Product Name: The name of the product (maximum 40 characters) that
appears on start-up, login, and Main Menu windows.
5. Choose Save or one of the other commands from the Action menu (see
Table 4-1).