User`s guide
Table Of Contents
- Contents
- About This Guide
- Introduction
- Installation
- Start-Up
- Configuration
- Displays
- Statistics
- Device Management
- Dial Function
- Firmware Download
- Reports
- Session
- Platform/Network Performance Monitor
- Hard Disk and System Recommendations
- NMS Windows Conventions
- Record and Device Locks
- Cabling Requirements
- Data Input Sheets
- Glossary
- Index
Configuration
4-52
6700-A2-GY31-70
July 1999
Use the commands in the Action menu to save or reset the System Colors.
NOTE:
Security Events Colors consist of enhancements provided by the Security
Manager feature. This feature is documented in the
COMSPHERE 6700
Series Network Management System Security Manager Feature Supplement
.
Procedure
1. Select Config from the Main Menu.
2. Choose System from the Config menu.
3. Choose System Colors from the System cascading menu.
4. Choose Groups from the System Colors menu.
5. To access the color group to be changed, select the color group from those
listed in Table 4-9. The System Colors window appears.
6. Select a color group element in the Color Group list box. The current color for
this color group element appears in the Color Name field, the Colors field
(the current color is highlighted with a thick box), and the Selected Element
field.
7. Select a color by selecting a box in the Colors palette section of the System
Colors window, or by using the selection list button to the right of the Color
Name field.
Repeat Steps 6 and 7 until you select all of the group elements that are to be
changed.