User's Manual

DCWL-7962OT Outdoor AP
Installation Manual Chapter 3 AP Installation
3-4
Fig 3-4 fixed installation of DCWL-7962OT(R5) AP
3.4.2 Wall Hanging Installation
When install the DCWL-7962OT (R5) outdoor AP with wall hanging method, the
steps are as below:
1. As shown in the fig 3-1, install the backplane at the bottom of DCWL-7962OT (R5)
first;
2. Make the AP wall mounting kit flat against the wall and mark the holes that the
crews needs to be installed into, and then punch four holes with the impact drill; Insert the
expansion bolt into the holes and use the rubber hammer beating it until the expansion
bolt got into the wall completely;