User's Manual

DCWL-7962OT Outdoor AP
Installation Manual Chapter 3 AP Installation
3-6
Fig 3-7 Wall hanging installation of AP
3.5 Connect Cables
3.5.1 Connect Network Cables
The DCWL-7962OT (R5) outdoor AP supports the 802.3at PoE power. The power
and the network cables should be isolated with water. Please install the waterproof kit
onto the network cables as the sequence in the following figure.
Fig 3-8 The installation sequence of the waterproof kit
After installed, insert the cables into the AP and screw the waterproof kit as the
sequence.