User's Manual

DCWL-7962OT Outdoor AP
Installation Manual Chapter 2 Preparation for Installation
2-1
Chapter 2 Preparation for Installation
2.1 Installation Precautions
Only allow the professionals installing and disassembling the device and its annex.
Before the installation and configuration, please read the related security introduction
carefully.
 Adopt the appropriate security measures to avoid the personal injury and
equipment damage.
 Please put the device on the dry and flat place and ensure the anti-skid
measures.
 Keep the device clean without dirt.
 Do not put the device and the installation tools in the walking area.
2.2 Installation Environment Requirements
Before the installation, please check the installation conditions of the device to make
sure that the device is in the good operating environment in a long time. Check this with
the following aspects.
The temperature and humidity environment requirements of the device are as below:
Table 2-1 The temperature and humidity index
Items Range
Standard working environment temperature (outdoor)
-40℃～60℃
Storage temperature
-45℃～70℃
Working humidity (non-condensing)
5%～95%
2.3 Equipment Accessories
Please refer to the packing list.