Installation Guide

15
G
L1 FROM UNIT
G FROM
POWER SUPPLY
G FROM UNIT
L1 FROM
POWER SUPPLY
NEUTRAL FROM
UNIT AND SUPPLY
UNIT
WIRE 1 FROM
G FROM UNIT
WIRE 2 FROM
G
2
1
2 CONDUCTOR WIRE
UNIT
FROM HEATER SWITCH
2
1
!
NOTE: This only illustrates
heater switch connection,
see previous sections for
main power connection
instructions.
120V WALL MOUNTED THERMOSTAT
CAUTION: The use of a wall mounted thermostat to control a 240V installa-
tion is not recommended. To control the unit with a thermostat the use of a
Dimplex Wall Remote - WRCPF-KIT - is suggested (sold seperately).
!
NOTE: Before installing the unit complete the following:
• Install main power connection with appropriate wiring - directly to the
main power or through a wall switch.
• Install a 2 conductor wire with ground (3 wires total) from the thermostat
wall box to the junction box on the unit.
!
NOTE: Wiring of the thermostat must be completed prior to installing the
FIREPLACE JUNCTION BOX
WALL
THERMOSTAT
RED – 1
GROUND - G
RED – 2